| Current Cost Support Forum http://currentcost.com/support/ |
|
| EnviR using two sensors on one transmitter http://currentcost.com/support/viewtopic.php?f=10&t=44 |
Page 1 of 1 |
| Author: | Alternative [ Tue Jun 07, 2011 4:23 pm ] |
| Post subject: | EnviR using two sensors on one transmitter |
I have got the display to read the combined total of both sensors, but I want to be able to view them separately. My intention is to have one sensor on my solar PV registering generated power and the other sensor registering house consumption as normal. Ideally I want them to display separately on the Current Cost website and Google Power Meter. I am uploading using the Current Cost Bridge. Nigel |
|
| Author: | currentcost [ Tue Jun 07, 2011 4:50 pm ] |
| Post subject: | Re: EnviR using two sensors on one transmitter |
We are currently testing the multi appliance bridge and although I do not have a release date yet, subject to the testing we hope to release this in the near future. |
|
| Author: | Alternative [ Tue Jun 07, 2011 5:31 pm ] |
| Post subject: | Re: EnviR using two sensors on one transmitter |
I had a call from CC Support and they said the only way to do what I want is to use an additional transmitter. Which one would work alongside my existing Senseable Transmitter? Would the Mini Transmitter do the job? I must be able to display the separate reading from both sensors and have them uploaded to the CC site and Google. |
|
| Author: | webbj [ Fri Jun 10, 2011 1:38 am ] |
| Post subject: | Re: EnviR using two sensors on one transmitter |
| Author: | matelodave [ Wed Jun 15, 2011 11:23 pm ] |
| Post subject: | Re: EnviR using two sensors on one transmitter |
This is eactly what I need and was disappointed to find that I can't easily get at the three seperate phase info without having a computer connected continuously. If the individual phase data streams had their own IDs like the temperature and whole house data you could probably do something with it using Pachtube. Although I've only just signed up with them to see whats doable. I'm not a programmer and dont know where to start yet - time will tell. Is there any possibilty that this will become available using the existing bridge and a single transmitter? |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|