|Current Cost Support Forum
|Incorrect energy readings with PWM Immersion
|Page 1 of 1|
|Author:||mr_gadget [ Wed Aug 14, 2013 10:09 am ]|
|Post subject:||Incorrect energy readings with PWM Immersion|
I recently has a solar pv installation completed including a pulse width modulated (PWM) immersion heater which activates when there is excess electricity.
Now, however, when the immersion comes on the total power usage of my house is incorrect. I assume this is because my current cost (CC128) can't calculate the power consumption correctly. I have another electricity meter which does show the correct value.
ie. house usage 700w + 2000w for the immersion but the current cost will show around 1500w.
Any thoughts on how I can cure this or work around it somehow.
|Page 1 of 1||All times are UTC [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group