| Current Cost Support Forum http://currentcost.com/support/ |
|
| Transmitter will not go into pair mode http://currentcost.com/support/viewtopic.php?f=11&t=27227 |
Page 1 of 1 |
| Author: | rmasonjr [ Tue May 29, 2012 9:08 pm ] |
| Post subject: | Transmitter will not go into pair mode |
I have one of the old Envi units. I tried to hold down the button on the transmitter for >9 secs and the LED light never starts blinking rapidly. It does flash every 6 seconds or so, but never goes into the "pair" mode. I tried changing the batteries - no help. I also tried leaving the batteries out for a while, then trying again - no help. Any other tips or tricks to get the transmitter into pair mode? Thanks |
|
| Author: | rmasonjr [ Fri Jun 01, 2012 2:38 pm ] |
| Post subject: | Re: Transmitter will not go into pair mode |
| Author: | SeekerAfterTruth [ Sun Jun 03, 2012 1:36 am ] |
| Post subject: | Re: Transmitter will not go into pair mode |
Not my area of expertise as I never seem to have problems tuning my units; but you could try releasing the transmitter button after the first flash (don't wait 9 seconds). I seem to remember that is how my old units worked. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|