| Current Cost Support Forum http://currentcost.com/support/ |
|
| Do Any NAS Applications Exist To Feed PowerMeter? http://currentcost.com/support/viewtopic.php?f=12&t=22 |
Page 1 of 1 |
| Author: | Automan [ Mon May 30, 2011 11:34 am ] |
| Post subject: | Do Any NAS Applications Exist To Feed PowerMeter? |
I was wondering if anyone had written an application for a NAS (either Netgear or Synolgy) to make use of the USB cable feed from the CC Envi or EnviR display unit. Many Thanks Automan. |
|
| Author: | Eule [ Wed Jun 01, 2011 2:37 am ] |
| Post subject: | Re: Do Any NAS Applications Exist To Feed PowerMeter? |
Hi I have setup a NAS to capture the data stream from the ENVI into daily data files. Now that I am using the CC bridge I am splicing the serial data and using the same code to capture the data on the NAS. I am using this NAS with a custom firmware It was quite involved since I had to change the NAS source code and cross platform compile it. This was mainly necessary to in order to add driver support for the usb to serial adapter (the same that is in the standard cable for the ENVI). Then I had to write a script that takes the serial stream and saves it to date stamped files. That script gets automatically started when the usb to serial adapter is plugged in or the NAS starts up with it being present. I did have some problems with splicing the serial cable, you are essentially listening into a serial communications so only connect the Rx and ground. My first cable was of bad quality so that it would drop our occasionally. Now with the CC bridge I bought a full RJ45 splitter and I therefore don't need to splice the original cable anymore. I just cut a LAN cable in half and connected the appropriate wires to the serial to USB adapter. I am not sure if that helps you since you want it for Netgear or Synolgy and I don't know anything about them. But essentially if you can get the serial stream into the NAS you should be fine. The usb to serial adapter that is in the ENVI cable is based on the PL2303, so if your NAS has driver support for that then all you need is to write a script for logging the data and get it started. If you want any more info let me know. Cheers |
|
| Author: | DidierRDV12 [ Sat Jun 18, 2011 10:56 am ] |
| Post subject: | Re: Do Any NAS Applications Exist To Feed PowerMeter? |
hello yes they are relevant for me as I have a ready nas duo an environment with a cable 128 cc OPTION A if you give an idea has to do a nas running this cool thank you for you support bonjour oui cela intéresse pour moi aussi j'ai un ready nas duo un envi cc 128 avec un câble OPTION A si tu a une donne idée pour le faire fonctionne sous un nas cet cool merci pour ton concours |
|
| Author: | DidierRDV12 [ Sun Jun 19, 2011 10:06 am ] |
| Post subject: | Re: Do Any NAS Applications Exist To Feed PowerMeter? |
hello I'm looking too has run my cc128 on a jai nas nas duo ready if you have information or I am interested thank you for your help bonjour je cherche moi aussi a faire fonctionner mon cc128 sur un nas jai un ready nas duo si tu a des information ou je suis interesse merci pour ton aide |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|