Current Cost Support Forum http://currentcost.com/support/ |
|
Bridge feed lost in Cosm and Device frozen in my.currentcost http://currentcost.com/support/viewtopic.php?f=13&t=28945 |
Page 1 of 1 |
Author: | dgalanos [ Thu Aug 30, 2012 11:07 am ] |
Post subject: | Bridge feed lost in Cosm and Device frozen in my.currentcost |
Hi all, I recently purchased one Current Cost EnviR with a netsmart bridge, in order to monitor my energy usage. First of all, I set up the EnviR with the online dashboard that Current Cost has designed, my.currentcost.com. After realizing that the capabilities of the dashboard do not fit my needs, I read about Pachube, which now is Cosm. I definitely went for a try. After setting up my account, it was very easy to setup my device and see in minutes my data over cosm console. Great application, but I could only see global energy (not IAM's) and temperature readings, which was a major disadvantage for. Apart from that, I could only download the average 5min values and not the raw data. And after all, I discovered that if the bridge loses internet or communication, the reading in cosm do not show zero and shows the last available value. I decided then to leave the testing for later, as I had to find a way to download raw data. Meanwhile, after claiming my device to cosm, in the currentcost dashboard, the device was displayed as frozen. After several tries, I could not managed to make the device go online again. I started then trying to mess with the cosm api and feed, deleting them, installing them again, but everything was becoming more frustrating...! And now here I am: 1. My api exists in cosm, but I can see no feed. 2. I tried to claim my device again, with no success. 3. In debug mode shows Awaiting incoming requests... 4. The bridge is on router, has obtained a normal ip through DHCP 5. Current Cost dashboard still shows Frozen device I do not know what to do. I need to fix the problem, because I am trying to use EnviR to develop an energy efficiency service for my customers. Many thanks in advance for your support. Dimitris |
Author: | currentcost [ Mon Sep 03, 2012 11:43 am ] |
Post subject: | Re: Bridge feed lost in Cosm and Device frozen in my.current |
Hi Dimitris, I believe we have resolved this issue via your support ticket. For the benefit of other users, deleting the feed or account at Cosm after claiming a device at Cosm creates all kind of problems. So if you claim your device at Cosm and experience issues, please email a support request to Current Cost technical support and we will resolve for you. |
Author: | DamoM [ Fri Sep 28, 2012 5:31 pm ] |
Post subject: | Re: Bridge feed lost in Cosm and Device frozen in my.current |
I have precisely this same problem and am not getting a response from Cosm. Unfortunately I deleted the data in Cosm before I read this thread. How do I un-freeze my bridge? |
Author: | DamoM [ Wed Oct 03, 2012 12:15 pm ] |
Post subject: | Re: Bridge feed lost in Cosm and Device frozen in my.current |
Problem has been (mostly solved). I sent a support request to CC and they responded quite quickly and reset the bridge remotely. This resolved the frozen issue but my IAMs are still not working. I suggest you email current cost if you have a problem as they are quite helpful. |
Author: | Lunnydrency [ Sat Oct 06, 2012 3:41 pm ] |
Post subject: | Re: Bridge feed lost in Cosm and Device frozen in my.current |
On your place I would address for the help in search engines. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |