| Current Cost Support Forum http://currentcost.com/support/ |
|
| Bridge and PVOutput.org http://currentcost.com/support/viewtopic.php?f=13&t=440 |
Page 1 of 2 |
| Author: | AlanIOW [ Fri Jul 22, 2011 8:40 am ] |
| Post subject: | Bridge and PVOutput.org |
Hi I was wondering if there was any chance the Bridge may connect to PVOutput.org, now that Google Powermeter is almost dead. PVOutput.org is a fantastic Australian site which plots Solar Generation and Household Consumption in a variety of ways. I use an Envi plus USB cable to upload live generation and consumption data via a 24/7 PC, the data can viewed here; http://pvoutput.org/intraday.jsp?id=2476&sid=1872 The bridge method would be far easier for people who don't want a permanently on PC, with much lower electrical consumption. I realise that the bridge can only post generation or consumption data as there is only one channel. |
|
| Author: | awheeley [ Fri Nov 18, 2011 2:35 am ] |
| Post subject: | Re: Bridge and PVOutput.org |
G'day Alan, I've got the same setup (Envi R Power Meter) with a bridge wanting to connect to PVOutput.org. Did you manage to get this connected without having a PC permanently on? -André |
|
| Author: | AlanIOW [ Fri Nov 25, 2011 10:03 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
| Author: | Andygodber [ Sat Nov 26, 2011 6:45 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
| Author: | AlanIOW [ Sun Nov 27, 2011 3:23 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
[quote="AndygodberAlan - are you doing a manual upload of your data? I see you are uploading the power/energy used......im using the auto upload of data generated by Sunny Explorer, but this only sends the generated data, not used, so i wondered how you were uploading tht?[/quote] Andy - I am uploading live data from the EnviR for both generation and consumption. I have an Optismart LED reader on the Generation meter which gives nearly 100% accurate generation readings, even better than directly from the inverter. The consumption data is from a CT clamp which is around the Live cable going into the Consumer Unit and the Live from the inverter twisted round so it goes through the same CT clamp backwards. This odd arrangement cancels out the generation from the Net giving the actual house consumption. Both the Optismart and the CT clamp are on different Appliance Nos. on the EnviR. Then PVOutput.org provide a small program to get the data off the EnviR to a PC via USB cable, which uploads every 5 Mins to PVOutput.org. You do have to input a few bits into the program like the Appliance Nos. etc. but once set up it works perfectly and the site gives all sorts of comparison data as well as data such as Electricity Saved each day, which as far as I know is the only way this can be done with Solar PV. Hope that helps Alan |
|
| Author: | johnlee [ Sun Nov 27, 2011 11:01 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
... Then PVOutput.org provide a small program to get the data off the EnviR to a PC via USB cable, which uploads every 5 Mins to PVOutput.org. You do have to input a few bits into the program like the Appliance Nos. etc. but once set up it works perfectly and the site gives all sorts of comparison data as well as data such as Electricity Saved each day, which as far as I know is the only way this can be done with Solar PV. Hope that helps Alan[/quote] Alan, what is url for this program. I don't have a netsmart so may solar accuracy not as great, but still ok, but have an envi with 2 input sensors, the house & the solar, each from clamps. So I assume I can do what you are doing and use pvoutput to graph house & solar every 5 mins. Can't seem to find the right stuff on pvoutput, I can see api, and file upload but not a 5 min thingy. Dohhhh... John |
|
| Author: | AlanIOW [ Sun Nov 27, 2011 11:48 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
Hi John Its called Integration Service and can be downloaded here; http://code.google.com/p/pvoutput-integ ... loads/list It is described about half way down this page here; http://pvoutput.org/help.html#overview But there are some help files in the download. Alan |
|
| Author: | AlanIOW [ Thu Dec 29, 2011 12:59 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
Apparently, PVOutput.org are organising a Polling Server, whatever that is, that will enable data from the Bridge to be posted directly to PVOutput without the need for a 24/7 PC. It will need to get the data via Pachube, but it should be alot simpler and cheaper than the current system. Alan |
|
| Author: | AlanIOW [ Fri Jan 06, 2012 9:24 am ] |
| Post subject: | Re: Bridge and PVOutput.org |
Hi In answer to my original post, you can now apparently upload data to PVOutput.org from your Bridge via Pachube. The details are here on their forum; http://getsatisfaction.com/pvoutput/top ... ce_pachube I have not tried it as I have sold my Bridge since I originally posted the question. Alan PS. I have got a friends Bridge uploading to PVOutput, very easy once you have the Pachube Api. No. and ID. See Here; http://pvoutput.org/intraday.jsp?id=6783&sid=5415 |
|
| Author: | jcmurphy [ Sat Jan 07, 2012 5:36 pm ] |
| Post subject: | Re: Bridge and PVOutput.org |
I've tried the PVOutput Pachube Auto Upload Service and it works great! Data moves from the Current Cost Envi to the CC Bridge to Pachube to PVOutput. PVOutput charts the Power (Power Consumed and Energy Consumed) and the Temperature (C). It was easy to set-up. The only small hiccup for me was that it took a few hours for data to appear (it should have started grabbing data within a few minutes). Bankstownbloke has done an outstanding job with the site and this new service! Jon |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|