Current Cost Support Forum

Anyone got this problem, whilst I raise a problem ticket?
Bridge has stopped posting all of my IAMs, and is only doing 3, as of around mid-day today GMT.
Data for the other channels is not appearing in Pachube either.

Yes count me in on that one - all day today

I have 3 IAMs, they stopped posting yesterday at 16:16, optismart was ok though. A reboot of bridge started posting again this morining. Automan had similar issue.

I just rechecked and coincidentally my last posting was at 16:12 yesterday. A reboot when I realised this evening solved the issue.

I'm suffering regular freezing too, on a bridge that was originally rock solid before the upgrade.

Data stream stopped updating on 13th at 2AM PST. Device was reported frozen at 6:38AM. Router shows Bridge has ip address and two connections with green and yellow activity but pattern suggest it is not getting data to currentcost servers.

Switched bridge to different router port and frozen shifts to green and data updates started again. Router switch went from static ip address for bridge to dynamic.

Cannot switch device to public so I can access the ID number and look at pachube data store.

Today, only my 1st three IAM's are posting, the others are all at 0

File comment: IAM 5,6,7 Gone Today

IAM's Have Gone Today.jpg [ 116.25 KiB | Viewed 18050 times ]


Automan.

If you are feeling brave I would check pachube site. If you go here:

https://pachube.com/devices/currentcost

Following instructions you can see the feed from your bridge directly on pachube, before it is rendered on CC website. There is also a debug option where you can see the 'posts' to the pachube website, click your feed and then debug, you will see a PUT every 5 mins.

NOTE: This will freeze your bridge on the CC website, but if you delete the bridge on the CC website and re-register, you will see the data, including historical again.