Current Cost Support Forum

Is it possible to poll the CC Bridge directly to extract data?
I thought I had read some developer documentation for the ENVI / CC Bridge that had the request strings for the CC bridge that would then send back an XML stream.

Please let me know if there is any such interface.

thanks!
greg

Don't know if it is possible or not. But you can directly connect a usb cable to the Envi to extract the data. This way it would be the same data from the Bridge in a way. But I would love a solution where we can connect both a Bridge and an USB cable simultanously to the Envi ( or Envi-r ), so that every so often I can extract the data directly from the device. Currently one needs to disconnect then reconnect the necessarry cable to do this.

Re-think about your question. If we can connect another interface to the Bridge to extract data, then it is less fiddly in a way to achieve what we need. Another way is if we can download the data which has been uploaded onto either the Currectcost server or the Google server would be another alternative I guess.

But the bridge has asigned a IP for DHCP and an server where send data (my.currentcost o GPM). Can I configure other server where send? For example, my PC.

But, can the bridge send the data for xml to other server which isn´t the server my.curretcost or GPM?

But, can the bridge send the data for xml to other server which isn´t the server my.curretcost or GPM?

Please help me to do this cable

[cc128] --> [Bridge] --> [router] and [cc128]--> [NAS (usb)]

DO you have a picture ?

You can also use an ethernet splitter if you don't want to modify cables.

I used an Ethernet cable out of the EnVi >> ethernet through connector >> ethernet 2X splitter (cost about $15)

Seems to work with one feed going to the bridge and the second to my laptop (LHS cable is the CC data cable, yellow cable is to the router).


Current Cost - 2X cables.jpg [ 118.98 KiB | Viewed 19453 times ]