Current Cost Support Forum • View topic

Site Announcements
The support forum is moderated Monday to Friday, UK time. To submit a support ticket, please email: helpme [at] currentcost .com

Site Announcements

The support forum is moderated Monday to Friday, UK time. To submit a support ticket, please email: helpme [at] currentcost .com

View unanswered posts | View active topics

Board index » Hardware » Dev Boards

All times are UTC [ DST ]

Development Boards

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Jonathan_Hill

Post subject: Development Boards

Posted: Tue Apr 19, 2011 12:14 pm

Joined: Mon Apr 18, 2011 9:10 am
Posts: 2

Can someone from CurrentCost post details/data sheets/schematics for the development boards please. I am interested in attaching one to my oil tank and monitoring the level/usage via a pressure transducer. The output of the transducer is in mV so assuming that the dev board can accept this.
Anyone elso played with analog inputs on these rather than mouse trap function?

Top

SeekerAfterTruth

Post subject: Re: Development Boards

Posted: Wed Apr 20, 2011 3:37 am

Joined: Mon Apr 18, 2011 5:26 pm
Posts: 138
Location: Melbourne, Australia

I obtained some Dev boards thinking to use them to count pulses from my Electricity meter with a maximum rate of 1.6 pulses/sec. Main advantage was the integrated wireless and backend processing. I was prepared to build some additional front end stuff. E.g. With an analogue input I could have converted the pulse rate to a voltage. Without it they have not been as useful as I thought and I am following a different path.

FYI My Dev Boards, obtained about 4 weeks ago, are marked version 1.2 and have only a single digital input (on or off). (There is no analogue input as shown in Yellowpark's Youtube videos). The input trips at about 1.5v on a Vcc of 3v. The output status is transmitted every 2.5 seconds (not 6 secs like the other sensors). Range is adequate, mine is working reliably over 10 meters through internal walls etc. Connection to ENVI as another appliance works as described. The output displayed on the ENVI is 500watts for on and 0watts for off.

_________________
Seeker
"The Truth is out there!"

Top

yellowpark

Post subject: Re: Development Boards

Posted: Wed Apr 20, 2011 9:59 pm

Joined: Fri Apr 15, 2011 12:32 pm
Posts: 2

hi Jonathan, here is the spec sheet: http://currentcost.posterous.com/curren ... cification

We're not yet live over here, please continue to use the Google Group for the time being. Chris

_________________
Chris Dalby
Current Cost Ltd

Top

scaredycat

Post subject: Re: Development Boards

Posted: Fri May 27, 2011 11:35 am

Joined: Fri May 27, 2011 11:33 am
Posts: 1

Top

SeekerAfterTruth

Post subject: Re: Development Boards

Posted: Fri May 27, 2011 5:32 pm

Joined: Mon Apr 18, 2011 5:26 pm
Posts: 138
Location: Melbourne, Australia

_________________
Seeker
"The Truth is out there!"

Top

SaFeHeX

Post subject: Re: Development Boards

Posted: Tue Jun 07, 2011 11:54 pm

Joined: Fri Jun 03, 2011 11:12 pm
Posts: 38
Location: UK

Top

g7pkf

Post subject: Re: Development Boards

Posted: Tue Nov 08, 2011 4:21 pm

Joined: Tue Sep 27, 2011 3:04 pm
Posts: 1

Dis you ever get the oil thing working?

I have found that the samller (takes 2 c batteries) tx is an analogue board.

now that means i heed an oil indicator that i can callibrate for 0-3V to indicate full/empty.

anyone know of such a transducer or am i going to have to re-invent the wheel. AGAIN

Top

mekTumKeeby

Post subject: Development Boards

Posted: Thu Oct 04, 2012 7:45 am

Joined: Wed Oct 03, 2012 5:29 pm
Posts: 10
Location: Россия

Have you ever consider to make a development board for propeller eigh core microcontroller?

Thanks

Top

Page 1 of 1

[ 8 posts ]

Board index » Hardware » Dev Boards

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum