| Current Cost Support Forum http://currentcost.com/support/ |
|
| Development Boards http://currentcost.com/support/viewtopic.php?f=15&t=9 |
Page 1 of 1 |
| Author: | Jonathan_Hill [ Tue Apr 19, 2011 12:14 pm ] |
| Post subject: | Development Boards |
Can someone from CurrentCost post details/data sheets/schematics for the development boards please. I am interested in attaching one to my oil tank and monitoring the level/usage via a pressure transducer. The output of the transducer is in mV so assuming that the dev board can accept this. Anyone elso played with analog inputs on these rather than mouse trap function? |
|
| Author: | SeekerAfterTruth [ Wed Apr 20, 2011 3:37 am ] |
| Post subject: | Re: Development Boards |
I obtained some Dev boards thinking to use them to count pulses from my Electricity meter with a maximum rate of 1.6 pulses/sec. Main advantage was the integrated wireless and backend processing. I was prepared to build some additional front end stuff. E.g. With an analogue input I could have converted the pulse rate to a voltage. Without it they have not been as useful as I thought and I am following a different path. FYI My Dev Boards, obtained about 4 weeks ago, are marked version 1.2 and have only a single digital input (on or off). (There is no analogue input as shown in Yellowpark's Youtube videos). The input trips at about 1.5v on a Vcc of 3v. The output status is transmitted every 2.5 seconds (not 6 secs like the other sensors). Range is adequate, mine is working reliably over 10 meters through internal walls etc. Connection to ENVI as another appliance works as described. The output displayed on the ENVI is 500watts for on and 0watts for off. |
|
| Author: | yellowpark [ Wed Apr 20, 2011 9:59 pm ] |
| Post subject: | Re: Development Boards |
hi Jonathan, here is the spec sheet: http://currentcost.posterous.com/curren ... cification We're not yet live over here, please continue to use the Google Group for the time being. Chris |
|
| Author: | scaredycat [ Fri May 27, 2011 11:35 am ] |
| Post subject: | Re: Development Boards |
| Author: | SeekerAfterTruth [ Fri May 27, 2011 5:32 pm ] |
| Post subject: | Re: Development Boards |
| Author: | SaFeHeX [ Tue Jun 07, 2011 11:54 pm ] |
| Post subject: | Re: Development Boards |
| Author: | g7pkf [ Tue Nov 08, 2011 4:21 pm ] |
| Post subject: | Re: Development Boards |
Dis you ever get the oil thing working? I have found that the samller (takes 2 c batteries) tx is an analogue board. now that means i heed an oil indicator that i can callibrate for 0-3V to indicate full/empty. anyone know of such a transducer or am i going to have to re-invent the wheel. AGAIN |
|
| Author: | mekTumKeeby [ Thu Oct 04, 2012 7:45 am ] |
| Post subject: | Development Boards |
Have you ever consider to make a development board for propeller eigh core microcontroller? Thanks |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|