Current Cost Support Forum http://currentcost.com/support/ |
|
Meter Reading Accuracy / Not Updating http://currentcost.com/support/viewtopic.php?f=21&t=13488 |
Page 2 of 3 |
Author: | craigski [ Mon Jan 09, 2012 12:17 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
My reading on CC website is just random number that is *lower* than the reading I entered on 27th Dec on the website. I have never been able to get the meter reading to work accuratley, although I read the new optismart is supposed to be 100% accurate: "The new OptiSmart monitor from Current Cost represents 100% accuracy* for monitoring and opens capabilities to monitor whatever sensor type you wish. * 100% accuracy (relative to existing meter) " |
Author: | Automan [ Mon Jan 09, 2012 1:29 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Both of my readings are also lower than they were yesterday Back to pen, paper and excel spreadsheet... Automan. |
Author: | PeterR [ Mon Jan 09, 2012 11:37 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Automan I just use an EnviR with two Optismarts, one for whole house and one for PV generation. I use Techtoniq's Energy Station (as this was recommended by CC) to download the data and it is spot on when compared to the meter readings. I don't use a bridge. |
Author: | Automan [ Tue Jan 10, 2012 12:15 am ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Author: | PeterR [ Thu Jan 12, 2012 12:50 am ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
No Automan, it just shows the consumption for the day, I enter this into a spreadsheet which increments the meter reading which I check from time to time against the meter. |
Author: | johnlee [ Fri Jan 13, 2012 5:53 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Author: | Automan [ Fri Jan 13, 2012 9:14 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Author: | Automan [ Thu Jan 19, 2012 5:03 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
My Meters no longer seem to update on the dashboard and are stuck Automan. |
Author: | Andygodber [ Thu Jan 19, 2012 6:55 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Author: | craigski [ Thu Jan 19, 2012 7:01 pm ] |
Post subject: | Re: Meter Reading Accuracy / Not Updating |
Meter has never really worked for me, they seem to start working, then go backwards or random, then end up same reading as originally entered. I have a ticket open with CC for a while, waiting for them to come back. I wonder if the optismart itself needs to be reset? |
Page 2 of 3 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |