Current Cost Support Forum

for some reason, yesterday lunchtime my EnviR stopped graphing/reading my solar generation

From day one I have had this working fine and all of my solar generation has been graphing nicely but all of a sudden it has just stopped.

Nothing has changed, no power cuts, but its just not taking any reading. I have tried repairing the clamp that I use to measure the Solar PV but it has made no difference.

Any assistance you can provide would be greatly appreciated

Thanks

it shows current usage....ie when the sun is shining its showing ZERO, but when the suns gone down it shows current usage.

I have an optismart reader on my electric meter showing overall consumption and I have a clamp on the cable coming from my inverter into the fuxe box which normally gives off a correct reading...but its no longer doing that.

So the Energy NOW number is correct BUT the whole reason I bought the better Net Smart model was so I could view more thasn one feed at a time, which is now no longer working

If I interpret your circumstances correctly, you have a cable clamp and transmitter whose power readings are shown correctly on the EnviR screen. So things look to be working up to the EnviR, but not beyond it to the Dashboard. Can you see anything on the Dashboard - ie EnviR temperature and OptiSmart data?

No. The only data te Envir shows us the total live energy use At no point do I get a reading for JUST PV gen.

The Envir is getting total usage from an Optismart on my metre and both total usage AND TEMPERATURE are showing fine on the dashboard.
However the solar is showing a flat line

Your Dashboard receives information from your ISP, that receives information from your router, that receives information from your NetSmart, that receives information from your EnviR, that receives information from your transmitter, that receives information from your sensor. So, if you are going to get this sorted, you need to provide more information.